Notes about unarcing DesTerm V2.00 ---------------------------------- The DesTerm 128 V2.00 release package consists of five files: DES200_1.SFX DES200_2.SFX DES200_3.SFX DES200_4.SFX DESNOTES.TXT If you do not have all of these files, you do not have the complete distribution package. If this is so, you should find out who uploaded the files you do have and ask them to add the rest! To extract the files, simply load each one into memory (128 mode is best) and type RUN. If you have a 1541 disk drive, you will need two disks -- extract DES200_1.SFX and DES200_2.SFX to the first disk, and the other files to the second. 1581 and 1571 users need only 1 disk, and all the .SFX files can be extracted in order. For some reason unknown to me, the file 'FILETYPE CHANGER' in DES200_2.SFX reports a CRC ERROR when extracting. The file is perfectly ok and this should not be a cause for alarm. If any other files are reported with errors, then there is a problem. After all the files have been extracted, execute the CHECK CRC program that has been supplied. This is a small program to verify that the vital parts of the package are ok. All files should be ok. DISTRIBUTION ------------ You are free to upload these files to BBSes as long as the following conditions are met: 1) Do not upload any of these files to any of the large PAY services (ie GENIE, COMPUSERVE, QLINK, BIX etc). I (or a designated person) will upload to these systems. 2) All of the five files MUST be uploaded. The five files must be in the same directory, and some indication made that all 5 need to be fetched. 3) The files must be uploaded in the original format. DO NOT re-archive the contents. The .SFX format works well as any -- don't play with it! Matthew E. Desmond BBS: (519) 747-5322. FIDO: 1:221/178 UUCP: uunet!watmath!xenitec!zswamp!spinq!desterm